We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand UAE. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Keyence
Country
Japan
Name
IL-1000
Type
Mounting bracket
Description
Sensorverstärker IL-1000
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
| Model | IL-1000 | |
| Type | DIN-rail mount | |
| Main unit/Expansion unit | Main unit | |
| Head compatibility | Compatible | |
| Display | Minimum displayable unit | IL-S025/IL-030: 1 µm, IL-S065/IL-065/IL-100: 2 µm, IL-300: 10 µm, IL-600: 50 µm |
| Display range | IL-S025/IL-030/IL-S065/IL-065/IL-100: ±99.999 mm to ±99 mm (4 levels selectable), IL-300/IL-600: ±999.99 mm to ±999 mm (3 levels selectable) | |
| Display rate | Approx. 10 times/sec. | |
| Analogue voltage output | ±5 V, 1 to 5 V, 0 to 5 V Output impedance 100 ?*1 | |
| Analogue current output | 4 to 20 mA Maximum load resistance of 350 ?*1 | |
| Control input | Bank switch input | Non-voltage input*2 |
| Zero-shift input | ||
| Stop emission input | ||
| Timing input | ||
| Reset input | ||
| Control output | Judgment output | Open collector output (NPN, PNP changeover possible/N.O., N.C. changeover possible)*3 |
| Alarm output | Open collector output (NPN, PNP changeover possible/N.C.)*3 | |
| Current | Power voltage | 10 to 30 VDC ripple (P-P) 10% included, Class 2*4 |
| Power consumption | 2300 mW or less (at 30 V: 77 mA or less) | |
| Environmental resistance | Pollution degree | 2 |
| Ambient temperature | -10 to +50 °C (No condensation or freezing) | |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
| Material | Case / Front sheet: Polycarbonate, Key tops: Polyacetel, Cable: PVC | |
| Weight | Approx. 150 g (including attachments) | |
| *1 Select and use one of ±5 V, 1 to 5 V, 0 to 5 V or 4 to 20 mA. *2 Assign an input of your choice to the 4 external input lines before using. *3 The NPN open collector rated output is: 50 mA max./ch (20 mA when adding an expansion unit) less than 30 V, residual voltage less than 1 V (less than 1.5 V when adding over 6 units including the main unit) The PNP open collector rated output is: 50 mA max./ch (20 mA/ch when adding expansion units), less than power voltage, and less than 2 V residual voltage (less than 2.5 V when adding over 6 units including the main unit) *4 If there are over 6 additional expansion units, please use a power voltage of 20 to 30 V. |
