We are not the manufacturer, authorised distributor or authorised representative of the IFM brand UAE. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
IFM
Country
Germany
Part number
SA4100
Description
Flow sensor with switching output, analogue signal and IO-Link
Stock availability:
On request
Application | |||||||
---|---|---|---|---|---|---|---|
Media | Water, glycol solutions, backlash, oils | ||||||
Medium note |
| ||||||
Measured medium temperature [°C] | -20…100 | ||||||
Pressure strength [bar] | 50 | ||||||
MAWP (for CRN application) [bar] | 50 | ||||||
Electronic data | |||||||
Operating voltage [V] | 18…30 DC | ||||||
Current consumption [mA] | < 100 | ||||||
Protection class | III | ||||||
Reverse polarity protection | yes | ||||||
Power-on delay time [s] | 10 | ||||||
Inputs/outputs | |||||||
Number of inputs and outputs | Number of digital outputs: 2 , Number of analog outputs: 1 | ||||||
Outputs | |||||||
Total number of outputs | 2 | ||||||
Output signal | Switching signal, analogue signal, frequency signal, IO-Link, (configurable) | ||||||
Electric Hard version | PNP/NPN | ||||||
Number of digital outputs | 2 | ||||||
Output function | normally open / normally closed, (parameterizable) | ||||||
Max. voltage drop of switching output DC [V] | 2.5 | ||||||
DC load current of switching output DC [mA] | 250 | ||||||
Number of analog outputs | 1 | ||||||
Analog current output [mA] | 4…20, (scalable) | ||||||
Maximum load [?] | 350 | ||||||
Short-circuit protection | yes | ||||||
Short-circuit protection type | clocked | ||||||
Overcurrent protection | yes | ||||||
Output frequency [Hz] | 0…1000 | ||||||
Measuring/setting range | |||||||
Probe length L [mm] | 100 | ||||||
Operating mode | Relative, Absolute liquid, Absolute gaseous | ||||||
Note on setting range |
| ||||||
Liquid media | |||||||
Measuring range [m/s] | 0.04…3 | ||||||
Setting parameters within [m/s] | 0…6 | ||||||
Gases | |||||||
Measuring range [m/s] | 2…100 | ||||||
Parameter setting within [m/s] | 0… 200 | ||||||
Temperature control | |||||||
Measuring range [°C] | -20… 100 | ||||||
Resolution [°C] | 0.2 | ||||||
Accuracy/Uncertainty | |||||||
Flow rate control | |||||||
Temperature drift [cm/s x 1/K] | 0.003 m /s x 1/K ( 70 °C) | ||||||
Max. environment) [K/min] | 100 | ||||||
Accuracy (in measuring range) | ± (7% MW + 2% MEW), (for relative mode in the measuring range c:, Water: 20…70 °C, inlet pipe length: 1.5 m, DN25 (DIN 2448), installation position according to the instructions, Accuracy may differ for other media and mounting positions.) | ||||||
Repeatability | 0.05 m/s, (Water, Flow velocity: 0.05…3 m/s) | ||||||
Temperature control | |||||||
Temperature drift | ± 0.005 K/°C | ||||||
Accuracy [K] | ± 0.3 / ± 1, (Water, Flow velocity: 0.3…3 m/s / backlash, Flow velocity: > 10 m/s) | ||||||
Reaction time | |||||||
Flow rate control | |||||||
Response time [s] | 0.5, (T09, Water, glycol: 0.8 s, backlash: 7 s, oil: 1.8 s, each T09) | ||||||
Temperature control | |||||||
Trip response time T05 / T09 [s] | 1.5 (T09), (Water, Flow rate: 0, 3…3 m/s) | ||||||
Software / Programming | |||||||
Parameter selection | Hysteresis / window, normally open/normally closed, switching logic, current/frequency output, medium selection, damping, teach-in function, display can be rotated and switched off, standard unit of measure, process value color | ||||||
Interfaces | |||||||
Communication interface | IO-Link | ||||||
Transmission method | COM2 (38.4 kBaud) | ||||||
IO-Link test | 1.1 | ||||||
SDCI standard | IEC 61131-9 | ||||||
IO-Link device ID | 533 d / 00 02 15 h (REL) | ||||||
Profiles | Smart Sensor: Process Data Variable, Device Identification, Device Diagnosis | ||||||
SIO Mode | yes | ||||||
Desired port type | A | ||||||
Analog operating data | 2 | ||||||
Binary operating data | 2 | ||||||
Minimum operating cycle time [ms] | 3 | ||||||
Operating conditions | |||||||
Ambient temperature [°C] | -40…80 | ||||||
Storage temperature [°C] | -40…100 | ||||||
Degree of protection | IP 65, IP 67 | ||||||
Tests / approvals | |||||||
EMC |
| ||||||
Impact resistance |
| ||||||
Vibration resistance |
| ||||||
MTTF [years] | 180 | ||||||
UL Certification |
| ||||||
Mechanical data | |||||||
Weight [g] | 299.5 | ||||||
Material | stainless steel steel (1.4404 / 316L), PBT-GF20, PBT-GF30 medium | stainless steel steel (1.4404 / 316L) | |||||
Process connection | Diameter Ø 8 mm | ||||||
Displays / Control elements | |||||||
Display |
| ||||||
Notes | |||||||
Notes |
| ||||||
Packaging size | 1 piece | ||||||
electrical connection | |||||||
Connection | Connector : 1 x M12, Contacts: gold-plated |