Generator GC 06 Emirel
Generator GC 06 Emirel

We are not the manufacturer, authorised distributor or authorised representative of the Emirel brand UAE. The private labels and part numbers shown on this website are the property of their respective owners.

Emirel GC 06

Manufacturer

Emirel

Country

Italy

Name

GC 06

Category

Pulse generators

Type

Generator

Description

CYCLIC PULSES GENERATOR – up to 6 outputs – for 24 VAC or 24 VDC loads

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications GC 06

FUNCTION The device energizes the outputs in sequence for the period T1 (pulse). Between the excitation of two outputs the period T2 takes place (pause). After the last output has been activated, the period T3 takes place (pause between the cycles); then the first output is energized again. USE It is used for the cyclic command of several loads, such as electrovalves for cleaning filters, relays, lamps etc.

Features GC 06

T1 (40ms÷1sec) Pulse period, adjustable by means of screwdriver. During T1 a red led for each output lights on. The current starts running into the load when the mains voltage passes through 0V (zero crossing), and consequently the electromagnetic noises are not generated. T2 (1÷60sec) Pause period between two outputs; adjustable by screwdriver. During T2 the green led lights on. T3 (1÷60sec) Pause period between the end of one cycle and the beginning of the next. Adjustable by screwdriver. During T3 the yellow led lights on. VISUALIZATIONS T1: red led 1÷6 T2: green led T3: yellow led MODE OF OPERATION The device starts automatically activating the first output, as soon as the supply voltage is on. VARIANT “6” on request (see below). OUTPUTS Pin 1÷6 For 24 VAC loads, the triac outputs activate when the voltage passes through 0V, with optoinsulation. For 24 VDC loads npn transistors outputs with diode protection. pin 7: loads common; it is inside connected to the pin 8, consequently it is connected to one phase, while in case of 24 VDC supply it is connected to + of the supply. WIRING DIAGRAMS See fig.1. (Wiring to an electrical board with a differential relay and a sectionalizing switch). The length of every wiring must be less than 30m. SUPPLY 24 Vac protected with fuse 2A 2VA - 50÷60 Hz ± 10% pin 8-10 24 Vdc 1 W protected with fuse 2A pin 8 (+) 10 (0V) 24Vdc ± 5% In both cases the loads are supplied by the same voltage supplying the device GC 06. CASE 53x90x75 mm per DIN - 3M Accessory on request: panel with hinges, transparent polycarbonate M 48C. WORKING TEMPERATURE: 0÷60°C WEIGHT: kg 0,150 COLOUR: grey